FD-F60D

Small and economical ion fan

Small and low price fan type. With an ion plate, it is small and can be placed in the palm of the hand, and has high-precision ion balance and high-speed static elimination, reducing the number of maintenance. Because of its compact design, it is suitable for spot dust removal inside the device and on the table.


Small・エコノミータイプのイオナイザー

Features of FD-F60

1. Surface discharge produces low ions

The ION BLADE is composed of a dielectric and a sawtooth-shaped microelectrode formed on its surface. Since it has a high density of plasma generating points, it can efficiently and uniformly generate high-concentration ions over the entire surface of the element.

Electrode part big picture

Electrode part enlarged view

プラズママ発の様子

The state of the plasma

In conventional electrostatic precipitators with needle electrodes (corona discharge method), the electrolysis at the tip of the needle emits ions from concentrated "points", while ION BLADE emits "surface" ions from the entire surface of the element due to its flat shape.

the electrode

conventional electrodes

The electric field is concentrated at the front and ions are generated from the point

There is dust attached to the front end, and performance degradation is a major problem

ION BLADE

ION BLADE

The electric field is uniform, and ions are generated in a planar shape.

Due to the surface shape, it is difficult for dust to adhere to the front end

2. Reduced maintenance times & reduced operating costs

  • Compared with the needle-type electrode used in the conventional eliminator (corona discharge method), this product can generate ions under low voltage conditions and reduce dust adhesion caused by the electric field.

3. Easy to clean

  • The electrode is a simple plane structure. Open the front guard to clean the electrode, fan, etc., and the operation is simple.

Neutralization Area Discharge Time Neutralization Area Discharge Time

Static Elimination Eria (representative example)

Static elimination area (representative example)

Static elimination time (front より150mm・representative example)

Static elimination time (from the front 150mm, representative example)

Measurement conditions: When the air volume is the largest, use a 150×150mm (20pF) charging board monitor to measure the time of removing electricity from ±1000V→±100V; the time of removing electricity is measured from 150mm in front of the center of the air outlet.

External Dimensions

Dimensions

DownLoad various data downloads

contact us

If you have any questions, please click here to consult and look forward to your contact.

Service Hotline

0512-67086298